• Wet Magnetic Drum Separator Sepor, Inc

    The most common type of wet drum separator is the low intensity wet drum separator, for recovering highly magnetic material. The drum has a magnetic field from 600 to 1,000 gauss, typically. Wet high intensity magnetic separators are also used for para-magnetic materials, with magnetic field intensity ranging from 7,000 gauss (Permanent Drum) to 20,000 gauss (Electro-magnetic drums).

  • Wet Belt Magnetic Separator Wet High Intensity Magnetic

    The LJDC wet belt magnetic separator is a permanent separator made by using high quality NdFeB magnetic elements. The surface intensity can reach up to 1.3T, this removes the ferrous minerals comingled with non-ferrous minerals efficientively.

  • Wet Magnetic Drum Separator 911Metallurgist

    Low-intensity separators are used to treat ferromagnetic materials and some highly paramagnetic minerals. Minerals with ferromagnetic properties have high susceptibility at low applied field strengths and can therefore be concentrated in low intensity (<~0.3T) magnetic separators. For low-intensity drum separators used in the iron ore industry, the standard field, for a separator with ferrite

  • Wet Low Intensity Magnetic Drum Separator

    Drum separators are most common low intensity wet magnetic separators. They consist of a rotating non-magnetic drum containing three to six stationary magnets, either permanent or electromagnets, of alternating polarity. Magnetic particles are lifted by the magnets and pinned to the drum and are conveyed out of the field leaving the gangue particles. Water is introduced into the machine to

  • Belt Type Magnetic Separator Manufacturer, Supplier & Exporter

    The belt type magnetic separator machine incorporates two conveyor belts, i.e. one carrying the mix of raw material feed uniformly through a motorized vibrating feeder. Another belt parallel to the main belt incorporates inverted magnetic plate and attracts the iron on the magnet which is separated as soon as it leaves the magnetic field.

  • Magnetic Separators Wet High Intensity Magnetic

    Magnetic Roll Separators are rolled type dry magnetic separators with the fixed magnet having high field intensity and gradient. The magnets used in the Roll Magnetic Separators and made of alloys of rare earth elements are more powerful as compared to other magnets.

  • Magnetic Separators 911Metallurgist

    Wet Type Magnetic Separators. Wet drum magnetic separators have been applied in several types of serv including: Media recovery in HMS plants; Application of the high intensity cross-belt is limited to material finer than 1/8 inch size with a minimum amount of minus 200 mesh material. The cost of this separator is relatively high per

  • Wet High Intensity Magnetic Separator 911Metallurgist

    In addition, a new type of high-gradient magnetic separator (HGMS) has been used in tungsten ore processing. Treating a refractory slide which contains 27.55% WO3 53% Sn, and 74% minus 74-µm fraction, the machine gave a final concentrate grade of 63.98% WO3 and 0.4% Sn with a recovery of 82.65% WO3. High Intensity Wet Magnet Separators

  • Wet High Intensity Magnetic Separation

    Compare Magnetic Separation MethodsWet High-Intensity Magnetic Separation ResultsMathematical Models to Optimize Magnetic Separator DesignPractical Aspects of Effective Separator DesignBeneficiation of Oxidized TaconitesThe Bureau of Mines is investigating the following three most promising technologies for the beneficiation of oxidized taconites: 1. Reduction roasting of the hematite and goethite to magnetite, followed by low-intensity magnetic separation and flotation. 2. Selective flocculation of the iron-bearing minerals, followed by froth flotation. 3. Wet high-intensity magnetic (WHIM) separation, either alone or in combination with selective flocculation a在911metallurgist上查看更多信息
  • Products Magnetic separator-LINQU HENGJIE MAGNETIC

    YSH series wet Heavy intensity magnetic separator; SC series comb magnetic separator; MW84 series use for handling medium-thick and thick steel plate; DY mobile belt conveyor; DYTN type electric-hydraulic plow unloader; Sand washer; K-type reciprocating feeder;

  • Belt Type Magnetic Separator Manufacturer, Supplier & Exporter

    The belt type magnetic separator machine incorporates two conveyor belts, i.e. one carrying the mix of raw material feed uniformly through a motorized vibrating feeder. Another belt parallel to the main belt incorporates inverted magnetic plate and attracts the iron on the magnet which is separated as soon as it leaves the magnetic

  • Eriez Wet High Intensity Magnetic Separator

    Eriez Wet High Intensity Magnetic Separator (WHIMS) WHIMS are designed for high capacity, continuous removal or concentration of feebly magnetic materials. Typical applications include

  • Wet Drum Magnetic Separator, Steinert Wet Drum Separators

    Steinert’s permanent magnet wet drum separators have been beneficiating iron ore and heavy media successfully for decades. In iron ore processing, the wet drum separator separates magnetic iron

  • Magnetic Sorting Belt Magnetic Separators / Separation

    Jaykrishna Magnetics Pvt. Ltd. has developed a unique product which is a combination of sorting belt and a super intensity magnetic roller which can easily remove highly paramagnetic and low paramagnetic with the magnetic

  • Optimizing the performance of wet drum J magnetic

    low intensity magnetic field or of the rare earth type providing a high intensity magnetic field. Wet drum magnetic separators are generally applied in three different ways, namely to recover and recycle the medium used in dense medium separation (DMS), to remove magnetic contaminants from ores and concentrates, and to recover valuable magnetic

  • Magquip-Magnetic Equipment

    Magnetic Equipment . Wet and dry drum magnetic separators low and medium intensity. Low intensity wet magnetic drum separators for recovery of magnetite or ferrosilicon in dense media separation